Siemens LME22.331C2 Burner Control: Verify the Full Code
If you are looking for the Siemens LME22.331C2, verify the complete code on the device label rather than searching by “LME22” alone. Siemens lists LME22.331C2 among its two-stage gas burner controls with actuator control and specifies AC 230 V for this variant. The same table lists LME22.331C1 at AC 120 V, which is why the final characters matter.
Why check the full model code?
“LME22” by itself is not enough to identify a control for a quote or replacement review. Siemens’ technical table lists different codes and supply ratings within the LME22 family. For example, C1 and C2 are not the same variant: Siemens lists LME22.331C1 as 120 V AC and LME22.331C2 as 230 V AC. That difference does not mean the units can be swapped; it means a similar-looking code is not evidence of compatibility.
Siemens also notes that its type designations are shown without the plug-in base and flame detector. When requesting a quote or service review, record the main module code alongside the manufacturer’s equipment documentation and any accessory references already available. Only qualified service personnel should verify base or detector details in the installed system.
Information to prepare before requesting a quote
- Full product code: Include the punctuation and suffix exactly as printed, such as LME22.331C2.
- Burner and equipment identity: Record the burner manufacturer and model, plus the machine or system where the control is used.
- Label photo: Send a sharp photo with the complete label readable. If a label is behind a closed guard, do not open it; ask a qualified technician to provide the photo.
- Documentation and accessories: Include the burner maker’s parts list and any base or flame-detector references already present in the service record. Do not guess missing codes.
- Commercial details: State the quantity and delivery country. Price, condition, availability and lead time are confirmed during the quotation.
This checklist helps a supplier review the request against the correct reference. It does not prove that a part is suitable for a particular burner. Confirm any match using the burner manufacturer’s documents and a qualified service assessment.
Which sources should you compare for Siemens LME22.331C2?
Start with the complete reference and product family in Siemens’ LME22.331C2 product listing. For the variant table, use Siemens’ LME gas burner control technical document. A product label containing “LME22” is not enough on its own; compare the punctuation, suffix and manufacturer reference together.
Belfa’s Siemens LME22.331C2 product page identifies this reference. Price, condition, availability and application suitability are confirmed during quotation; neither the product page nor this guide guarantees stock or compatibility.
Frequently asked questions
Can LME22.331C1 be used instead of LME22.331C2?
Do not decide from the similar code alone. Siemens lists C1 at 120 V AC and C2 at 230 V AC. The correct model must be confirmed against the burner manufacturer’s documentation by qualified service personnel.
What if the label only shows LME22?
Report the code exactly as visible and include clear photos of the burner and machine labels. Share base or detector codes only when they are available in an existing record or confirmed by a qualified technician.
Is this an installation or commissioning guide?
No. Selecting, replacing and commissioning gas burner controls is outside the scope of this article. Follow the manufacturer’s instructions and use qualified burner service personnel.