Find industrial spare parts by system group The Industrial Parts collection is a broad set of products used across automation and production systems. The live listings include KEB...
Send a part no., machine model or a photo — 18 years of OEM cross-reference knowledge will find it, and we reply the same day.
The Industrial Parts collection is a broad set of products used across automation and production systems. The live listings include KEB F5 frequency inverters and drive operator panels, Rockwell Automation / Allen-Bradley PanelView touchscreens and logic modules, B&R PLC CPUs, backplanes and I/O modules, 24 VDC power connectors and other control components. The list does not represent one control platform, machine brand or application. A product’s function and interface depend on model family, board revision, firmware, panel design and machine configuration. Search by more than a device brand: confirm the catalogue number, hardware version and slot or connection point in the machine.
Product names may include KEB F5 drive references such as 14.F5.C1D-380A and 15.F5.C1E-350A, along with operator panels 00.F5.060-1000 and 00.F5.060-2000. The prefix, body and every suffix can distinguish electrical or hardware configurations, so copy the full code from the product label. For a drive replacement, authorized staff should compare voltage class, phases, current, motor data, I/O, communication card, parameters and firmware. For an operator panel, check screen, keypad, connector, cutout, firmware, drive model and its control interface. A matching enclosure or product family does not establish a matching parameter set or panel interface. Commissioning or machine start-up steps should follow procedures from authorized electrical and automation personnel.
The live list includes touchscreen display modules 2711P-RDT10C, RDT12C, RDT15C and RDT7C, logic modules 2711P-RP8A/RP8D and RP9A/RP9D, and 2711P-T series terminals. These catalogue numbers identify different PanelView family display, logic and terminal components. Match size, series, connection, firmware, touchscreen compatibility, operator terminal and existing logic-module revision. A replacement display is not the same as replacement of the complete terminal. Photograph the old terminal’s rear label, screen diagonal and model number; check machine program, communication and cutout requirements in the maintenance documentation. Confirm cross-compatibility or product status against the maker’s current product page and machine documentation; do not infer lifecycle status or availability from a product name.
B&R listings may include CPU references such as 3CP260.60-1, 3CP340.60-1 and 3CP360.60-1, backplane parts 3BP150.4 and 3BP151.4, and input or output modules such as 3AI775.6, 3DM486.6, 3DO479.6 or 3DO650.6. A CPU, backplane and I/O module do not perform the same role; include the slot number and module type from the system diagram in a fault request. Compare the full order number, hardware revision, bus or rack connection, channel type, terminal block and controller family. A similar enclosure in one product family does not prove CPU software or system-bus compatibility. Photograph the front, side label, rear connector and controller slot. PLC project, parameter and safety-function transfer is not established by a product listing and should be handled separately in the maintenance plan.
A name such as 0TB103.9 24 VDC power connector can identify an interface component used in an automation rack or device connection. The voltage alone does not specify polarity, pin count, mechanical key, wire gauge or compatible module. Provide the old code and a photo of its contact face, and identify the mating plug and terminal block. Products such as a PLC backplane, power distribution board and communication accessory can look similar without sharing a layout. Isolate the electrical panel safely and follow the site procedure before replacement. An authorized electrician should verify terminal markings and wiring arrangement. A 24 VDC phrase in a listing does not establish a different application voltage or current rating.
Provide machine maker, full model, controller or drive platform, serial number and location of the equipment in the cabinet. Copy the catalogue number from the failed product’s label, preserving zeros, periods, hyphens and suffixes. Photograph any hardware revision, serial tag, firmware version, connector and slot. For a PLC module, include its slot and signal type; for an HMI, terminal family and display; for a drive, complete code and motor and supply labels; for a connector, pins and wiring. Keep alarm code, previous machine changes and reason for replacement in separate fields. A product photo alone may not establish internal hardware revision. Do not mark a quote line as confirmed compatibility until the listing code matches the machine parts catalogue.
Browse industrial products by function in [pneumatic parts](/en/collections/endustriyel-pnomatik-parcalar), [automation and control](/en/collections/endustriyel-otomasyon-ve-kontrol), [sensors and measurement components](/en/collections/sensorler-ve-olcum-bilesenleri), [bearings and mechanical parts](/en/collections/rulmanlar-ve-mekanik-parcalar) and [drives, motors and power](/en/collections/suruculer-motorlar-ve-guc). These subcollections do not make a part technically interchangeable across groups; a product can appear in more than one functional category. Use catalogue codes and manufacturer documents. Installation, parameter loading and commissioning of PLC, drive, HMI and safety-circuit components should be handled by maintenance personnel with the appropriate authorization. Collection copy does not claim to validate machine design, safety or manufacturer approval of a product’s status.
An operator panel, logic module, PLC CPU, backplane, power connector and drive can sit in one machine cabinet without being substitutes for one another. When a fault occurs, record the LED, screen message, alarm and wiring-diagram position that identify the affected layer. If only a display module is being replaced instead of the complete HMI, verify the terminal family and connection to the existing logic module. A PLC backplane needs a rack arrangement and controller family match as well as a similar connector shape. Record a drive panel separately from the frequency inverter by its full product code. Instead of a single note such as “machine stopped,” identify the failed component, code revision and schematic position so the different technologies in this collection can be reviewed accurately.
A short device name in the live product listing should not by itself decide which module to remove. Within one 2711P family, display, logic-module and complete-terminal codes can appear together, so the machine maintenance team should provide a photo of the label on the failed component. A B&R CPU may have physical and software dependencies on its backplane or I/O modules. When creating a purchase number, retain the complete rear label, slot and connection position, serial or revision information and controller-project backup together. The item description should match the supplier code exactly; add an old machine code as a cross-reference only if a documented alternate number supports it. This keeps different product types from being combined on a quote line as one generic PLC part.
For items listed in industrial spare parts, compare related part types in industrial automation and control · industrial pneumatic parts · bearings and mechanical parts. Check the model, connection and full part reference separately for each product.
Domestic or export — we find the part and send price and lead time the same day.
